Skip to content
Tokuyama Palfique LX5 Syringe Refill

Tokuyama Palfique LX5 Syringe Refill

Sold out
Rs. 1,660.00 - Rs. 1,660.00
Rs. 1,660.00
Rs. 1,660.00 - Rs. 1,660.00
Rs. 1,660.00
COLOR: Tokuyama Palfique LX5 Syringe Refill Shade A1

Tokuyama Palfique LX5 Syringe Refill

DESCRIPTION

Palfique LX5 Syringe Refill is an advanced light-cured composite resin designed for anterior and posterior restorations, suitable for all carious classes. Comprising 82% by weight (71% by volume) of silica-zirconia filler and composite filler, it exhibits decreased polymerization shrinkage due to its high filler load. The inorganic filler, featuring spherical submicron particles (mean size: 0.2μm), ensures exceptional gloss retention and wear resistance. The monomer matrix contains Bis-GMA and Triethylene glycol dimethacrylate. Incorporating Radical-Amplified Photo polymerization initiator technology (RAP technology), PALFIQUE LX5 offers a one-third reduction in curing time compared to conventional resin composites, facilitated by a light curing unit with a wavelength range of 400 to 500nm.

Indications:

  • Direct anterior and posterior restorations, including occlusal surfaces, covering all carious classes.
  • Direct bonded composite veneer.
  • Diastema closure.
  • Repair of porcelain/composite.

FEATURES:

  • Outstanding Polishability
  • High Gloss Retention Over Time
  • Wide Shade Matching Range (Chameleon Effect)
  • High Wear Resistance
  • Minimal Wear to Opposing Teeth
  • Low Shrinkage
  • Good Radiopacity
  • RAP Technology for Shortened Curing Time
  • Versatile Indications: Suitable for anterior and posterior restorations, veneers, diastema closure, and repair of porcelain/composite.
  • Advanced Filler Composition: 82% silica-zirconia filler, reducing polymerization shrinkag

KEY SPECIFICATION:

  • Quick Curing Time: 10 sec. with halogen light (≥400mW/cm2)
  • Extended Working Time: 90 sec. under ambient light (10,000 lx)
  • Available in 20 shades
  • Extended workig time
  • Outstanding polishability

PACKAGING:

  • 1 x Palfique LX5 Syringe Refill (3.8g)

DIRECTION TO USE:

Isolation:

  • Isolate the treatment area using a rubber dam or other suitable isolation methods to prevent contamination.

Tooth Preparation:

  • Prepare the tooth according to standard restorative procedures, removing any decay or damaged structure.

Etching and Bonding:

  • Etch the tooth surface with an appropriate etchant, rinse, and apply a bonding agent as per the manufacturer's instructions.

Application of PALFIQUE LX5:

  • Dispense the PALFIQUE LX5 from the syringe onto a mixing pad. Use an appropriate instrument for placement and shaping.

Light-Curing:

  • Light-cure PALFIQUE LX5 using a suitable light-curing unit. Follow the recommended curing time and ensure adequate coverage of all applied material.

Finishing and Polishing:

  • Once cured, finish and polish the restoration using fine finishing burs and polishing discs to achieve the desired aesthetics.

Check Occlusion:

  • Verify occlusion to ensure proper bite and adjust if necessary.

Clean Instruments:

  • Clean placement instruments with alcohol after use.

Patient Instructions:

  • Advise the patient to avoid chewing on hard objects immediately after the procedure.

Safety Precautions:

  • Adhere to safety precautions, including the use of protective eyewear when using a light-curing unit.