Snow Rock Ultra Hard Green Die stone ( Type -4 )

• Type: Type 4 Dental Die Stone
• Color: Green
• Mixing Ratio: 100 g powder : 20–24 ml water (approx., depending on consistency)
• Compressive Strength:
• Wet: Approx. 35–45 MPa
• Dry: Approx. 80–100 MPa
• Setting Expansion: 0.09%
• Setting Time: 8–12 minutes
• Working Time: 5–7 minutes
• Surface Hardness: High, glass-like finish

1. Measure Materials
Use the recommended ratio: 28 ml of water for every 100 g of stone powder for optimal consistency and strength.

2. Prepare Tools
Ensure the mixing bowl, spatula, and working surface are clean and dry before starting.

3. Add Water First
Pour the required amount of water into the mixing bowl first.

4. Add Powder Gradually
Slowly sift the Snow Rock Ultra Hard Green Die Stone powder into the water to prevent clumping.

5. Mix the Material
Mix for about 15 seconds using a spatula or mechanical mixer until a smooth, bubble-free consistency is achieved.

6. Pour into Impression
Pour the mixture slowly in a single continuous flow, preferably using a vibrating table to remove air bubbles and ensure complete filling.

7. Allow Initial Setting
Let the stone set undisturbed for approximately 8 minutes.

8. Demold the Model
After setting, allow the model to rest for at least 1 hour before removing it from the impression.

9. Finishing
Carefully remove the model and trim or clean as required.

10. Storage
Store the powder in a cool, dry place to prevent moisture absorption and maintain product quality.

12 pkt of 1.5kgs in a box, Box weight is 18 kgs

Warranty not applicable for this product