Agkem Ultrasonic Cleaner CD-4821

The Codyson CD-4821 Ultrasonic Cleaner has become an essential asset for dental clinics, helping maintain superior hygiene standards. Its advanced ultrasonic technology ensures effective removal of contaminants, debris, and stains from dental instruments, delivering reliable and thorough cleaning every time. The touch-sensitive control panel enhances ease of use, making it simple to incorporate into daily clinical routines. Additionally, its spacious stainless steel tank easily accommodates multiple instruments, supporting a smooth and efficient workflow.

Cleaning Tank Capacity:
2500 ml SUS304 stainless steel tank

Tank & Basket Dimensions:
24.5 × 15 × 7.6 cm

Overall Unit Size:
31.4 × 24.3 × 20.4 cm

Power Supply:
170W

Control System:
Digital interface with a 1–30 minute timer and dual-color LED display

Ultrasonic Transducer:
Industrial-grade Φ38 transducer with an enhanced commercial driving circuit

Control Technology:
Capacitive sensor panel with touch-sensitive keys

Heating System:
100W ceramic heater with a temperature limit of 65°C

Housing:
4mm engineering-grade plastic body with a double-fixing structural design

Ultrasonic Frequency:
35 kHz

Durability & Anti-Interference:
Moisture-resistant PCB and industrial-grade IC components

Continuous Operation:
Equipped with a cooling fan for reliable, long-duration performance

1. Prepare the Cleaning Tank
• Remove the lid and place the items to be cleaned into the cleaning basket.
• Insert the basket into the cleaning tank and fill it with water until the level is between the MIN and MAX marks, ensuring the items are fully covered.
• Note: Never operate the unit without water. Running the cleaner dry for more than 30 seconds can damage the machine and shorten its lifespan.

2. Power On and Set Cleaning Time
• Connect the power cord to a suitable outlet and switch the unit on. The LED display will show 05:00 minutes, which is the most commonly used cleaning time.
• If needed, adjust the time by pressing the Time button and arrow button.
• The timer can be set between 1 and 30 minutes, with 5, 10, or 15 minutes being typical cleaning durations.
• Avoid excessive cleaning times, as they may cause loosening of screws, expansion of existing cracks, or peeling of already separated coatings.

3. Start the Cleaning Process
• Press the On/Off button to begin ultrasonic cleaning. During operation, a buzzing sound indicates that the ultrasonic waves are working.
• Closing the lid helps reduce noise.
• The LED display counts down to show the remaining cleaning time. When the display reaches 00:00, the cleaning cycle is complete.
• You can stop the process anytime by pressing On/Off.
• The unit includes overheating protection.
• If the red indicator light appears, the cleaner will temporarily stop operating.
• Allow the unit to cool for about 20 minutes until the green light appears before restarting.

4. Use Additional Functions (Optional)

Heater Function:
• Press the Heater button to activate heating. The water temperature will automatically stop rising when it reaches 60°C (140°F).
• For safety, the heater will also shut off automatically after 45 minutes of operation.

Degas Function:
• When using a cleaning solution, activate the Degas function to improve solution mixing.
• Set the timer using the Time button, press the Function button, and then press On/Off.
• The degassing process runs for 90 seconds before switching to normal cleaning.
• Cleaning is complete when debris or “smoke-like” particles are no longer visible in the water.
• If additional cleaning is needed, reset the timer and repeat the cycle.

5. After Cleaning
• When the cleaning cycle finishes, turn off the unit, remove the lid, and carefully take out the cleaned items.
• Pour out the used water using the pouring recess, then clean and wipe the tank dry before storing the unit.

1 x Ultrasonic Scaler Unit
1 x Top Cover
1 x Power Cord
1 x Plastic Basket
1 x User Manual

warranty of 1 Year against manufacturing defect