ELEGOO Saturn 4 12K Resin 3D Printer

Elegoo Saturn 4 is a cutting-edge resin 3D printer that combines innovative technology with high performance. Featuring a 10-inch 12K mono LCD screen, it delivers unprecedented detail and clarity in prints. The printer incorporates advanced Tilt Release Technology for effortless resin handling and boasts a COB + Fresnel collimating lens system that ensures smoother curing.

    Auto leveling and an intelligent mechanical sensor provide precise calibration and hassle-free setup right out of the box. Enhanced with AI intelligent monitoring, the Saturn 4 Ultra offers real-time print tracking, power-loss resume functionality, and minimizes potential issues. With ultra-fast printing capabilities and a user-friendly design, it’s perfect for both hobbyists and professionals seeking top-tier results.

• Resolution / LCD Screen: 10-inch 12K Mono LCD (11520 × 5120) with XY resolution of ~19 × 24 µm
• Build Volume: ~218.88 × 122.88 × 220 mm
• Layer Thickness: 0.01 – 0.2 mm
• Printing Speed: Up to ~150 mm/h
• Light Source / Optics: COB + Fresnel collimating lens at 405 nm with high uniformity (~92%)
• Auto-Leveling & Self-Check Functions: Yes — automatic bed leveling and quick system self-check before printing
• Connectivity / System: USB & WiFi supported; 4.0-inch capacitive touch screen
• Included Wash & Cure Station: The “Combo” variant includes post-processing station (wash + cure) as part of the package

1. Unbox and Set Up
• Carefully unbox the printer and place it on a stable, flat surface.
• Plug the power cord into the printer and connect it to a power outlet.

2. Install the Build Plate
• Attach the build plate to the Z-axis arm and tighten the knob securely to hold it in place.

3. Auto Leveling
• Turn on the printer and use the touchscreen to start the auto-leveling function.
• The printer’s intelligent mechanical sensor will automatically calibrate the build plate.

4. Add Resin
• Pour 405nm UV resin into the resin tank up to the recommended fill level. Avoid overfilling.

5. Load the 3D Model
• Insert a USB drive containing the sliced .ctb file into the printer.
• Select the file from the touchscreen menu.

6. Start Printing
• Confirm the print settings and tap Start to begin printing.
Monitor the progress with AI real-time tracking on the display.

7. Post-Processing
• After printing, remove the build plate and detach the model.
• Wash the print in isopropyl alcohol (IPA) and place it in the Wash & Cure station for UV curing.

8. Clean Up
• Clean the resin tank and build plate thoroughly to keep the printer ready for the next print.

• 1 x Elegoo Saturn 4 Combo with Wash & Cure
• 1 x WIFI ANTENNA
• 1 x AI CAMERA
• 1 x RESIN TRAY
• 1 x USB FLASH DISK
• 1 x MASK
• 1 x GLOVES
• 1 x BACKUP SCREWS
• 1 x USER MANUAL
• 1 x ADAPTER
• 1 x TOOL KIT
• 1 x SCRAPER

N.A.